NOKIA/MOBIRA P4000 & PT612 NOTES: These are dual NAM units. The ESN prefix is 165 decimal & A5 hex. Nokia: 813-536-5553 NAM PROGRAMING: 1. Turn power on. 2. Enter * 3 0 0 1 # S S S S S SEL 9 END where SSSSS is the security code 1 2 3 4 5 is the factory default. 3. If the above was successful the phone will display "IdEnt IF InFO Pri" Skip to step 7 to program NAM 1, or complete steps 4 - 6 to switch to NAM 2. 4. Press SND to toggle to "IdEntif InFO OPT" 5. Press END and the phone will display "OPt InFO diSAbLEd" 6. Press SND and the phone will display "OPt InFO EnAbLEd" 7. Press END, the first data entry will be displayed. 8. SND is used to toggle single digit parameters. 9. Press END to store and increment each step. 10. At any time SEL CLR to exit programing. PROGRAMING DATA STEP# #OF DIGITS/RANGE DISPLAY DESCRIPTION 01 00000 - 32767 HO-Id SYSTEM ID 02 0 OR 1 ACCESS MIN MARK 03 0 OR 1 LOCL OPt LOCAL USE MARK 04 10 DIGITS Phonxx MIN (AREA CODE & TEL#) 05 08 ONLY St CLASS STATION CLASS MARK 06 333 OR 334 PAging Ch INITIAL PAGING CHANNEL 07 2 DIGITS O-LOAd CLASS ACCESS OVERLOAD CLASS 08 A OR B PrEF SyS PREFERRED SYSTEM (SND TOGGLES) 09 2 DIGITS grOUP Id GROUP ID (10 IN USA) 10 5 DIGITS SECUrity SECURITY CODE (LEAVE AT 12345) 11 8 DIGITS SERIAL NUMBER CAN NOT BE CHANGED 12 MM/DD/YY 1 dAtE CAN NOT BE CHANGED 13 MM/DD/YY 2 dAtE INSTALLATION DATE