read new nonstop follow 86748 13-APR 21:25 General Information RE: New MM/1 Monitor (Re: Msg 86742) From: JOHNBAER To: BOISY Thanks for the info. I'll have to start asking around to see what's out there now that will work with the MM/1... The CM-8 I have won't last forever . That $125 is a good price for the spect's you gave out. Good catch.. and enjoy. -- John - *** Posted with Ved 2.3 & IX 1.0.1 *** -*- 86752 13-APR 22:11 General Information RE: New MM/1 Monitor (Re: Msg 86748) From: DSRTFOX To: JOHNBAER (NR) John, you can pick up a NEW Commodore 1084S (made by Magnavox for Commodore- basically a 1CM135 with the addition of separated as well as standard combined composite inputs) for $199.95 from Tri-State Computer (NY) 1-800-433-5199. These are made for the Amiga and have twin speakers (not amplified). I use one with my CoCo 3 . Has analog and digital (IBM/CGA) inputs also. -*- 86754 13-APR 22:52 General Information RE: New MM/1 Monitor (Re: Msg 86737) From: HAWKSOFT To: BOISY Hi Boisy!! > For those of you with MM/1's (or CoCo's for that matter) looking for a > good RGB Monitor, take a look at the Sony CDP-1302. I bought one off the > net for my MM/1, and today it came in. This monitor has a .25 dot pitch, > a built in swivel stand, 800x600 resolution, multisync and can handle > analog or digital signals. > The only think lacking with this monitor is sound, and I plan to remedy > that soon by looking for a cheap amplifier/mixer combination. I would be > interested > in hearing from other MM/1 owners who use this type of sound system for > their computer. I'm using a set of KOSS Hard Drivers with my MM/1 and Magnavox515. They are made for computer use. (I had to change the mini-plug to connect to the MM/1 and to hookup the sound from my CDrom unit) They cost about $25 at my local Target store and work well (and the color matches the rest of the equipment). Are you coming to the 'fest?? I'm always at the 'Chicago' 'fest 'cause I can see the hotel from here! :-> :-> :-> :-> :-> :-> :-> Chris "HAWKSoft" <-: <-: <-: <-: <-: <-: <-: Delphi: HAWKSOFT Internet: HAWKSOFT@DELPHI.COM ******************< Uploaded w/ InfoXpress vr. 1.01.00 >****************** -*- 86755 13-APR 23:22 General Information RE: New MM/1 Monitor (Re: Msg 86748) From: WA2EGP To: JOHNBAER (NR) I'm using a Mitsubishi Daimond Scan AUm-1391A with mine. Another "no longer manufactored" one but they are around. Got mine at a computer show a couple years ago from a liquidator. Someone was collecting this info but I guess never posted it. Maybe I should (grin). -*- 86759 14-APR 00:19 General Information RE: New MM/1 Monitor (Re: Msg 86754) From: BOISY To: HAWKSOFT (NR) Hey Chris, Thanks for the info on the speakers. Thanks to Bill Clinton I don't have extra money to invest in a sound mixer/speakers now since it's tax time, but I'll keep them in mind. You bet, I'll be at the fest. Wouldn't miss it! -*- 86766 14-APR 07:05 General Information RE: New MM/1 Monitor (Re: Msg 86748) From: JEJONES To: JOHNBAER (NR) > The CM-8 I have won't last forever . True. When I went back to visit my folks and fired up the CoCo, I couldn't believe what I saw...the CM-8 was *so dim* compared with the Magnavox monitor I use--heck, compared with what I remember the CM-8 being like!--that I couldn't believe it. When I look at monitors, I see them list the *maximum* scan rate they can handle, but I don't see a minimum listed. Is there a minimum, or can any of them handle 15.whatever KHz? Opinions herein are those of their respective authors, and not necessarily those of any organization. Clipper Chip: Big Brother Inside -*- 86767 14-APR 14:22 General Information RE: New MM/1 Monitor (Re: Msg 86766) From: MITHELEN To: JEJONES (NR) most new monitors will NOT "multisync" down to 15.?? KHz... I just went through this delemawhen looking for a monitor that I could both use on my MM/1 AND my Sun... (I was looking at 17" - 21" size range) I eventually gave up, and just got one that would work on the Sun, and down to 30.?? KHz... The Sun sncs at like 66 KHz... it was tough to find a "reasonable" priced monitor that would go that high even... The monitor I eventually got is from Dell.. and is just barely adiquite... its pitcure quality isn't the greatest.. but is useable (it ia also only 17" and I was hopeing for 19") it's not useable on the MM/1.. but, it will at least be usable on a DOS box is I ever get one to run OS-9000 on. I suspect that it is gonna be very hard to find monitors that sync down to coco/mm/1 rates in the near future... especially NEW ones, thaqt will also work on VGA/SVGA systems... -- Paul -*- End of Thread. -*- 86749 13-APR 21:53 General Information RE: workspace (Re: Msg 86726) From: DSRTFOX To: COLORSYSTEMS Zack, is there any way to make all MAIL.MAI files "hidden" to the user? Would certainly cut questions down! If so, would be a good suggestion to service... -*- 86753 13-APR 22:18 General Information RE: workspace (Re: Msg 86749) From: COLORSYSTEMS To: DSRTFOX (NR) > Zack, is there any way to make all MAIL.MAI files "hidden" to the user? > Would certainly cut questions down! If so, would be a good suggestion to > service... Funny you should ask that question! Yes, you can sort of "hide" all the the mail files, the MAIL.MAI file and all of the MAIL$xxxxxxxx.MAI files. At the "MAIL>" prompt you can enter: MAIL> set mail_directory [.MAIL] This command will move all files associated with VAX EMail into a subdirectory called [.MAIL]. You can use any name you wish. ------------------------------------ Zack C Sessions "We did not inherit the Earth from our Ancestors, we borrowed it from our descendants." Ancient proverb -*- End of Thread. -*- 86750 13-APR 21:55 General Information RE: Disk backup (Re: Msg 86728) From: DSRTFOX To: MODEL299 I'll definately be at the Chicago CoCoFest this year, unless Uncle Sam calls and just can't do without me (I'm USAF... don't expect any problems at all!- have plenty leave time saved up!). Will talk about your set-up there, maybe! -*- 86758 14-APR 00:06 General Information RE: Disk backup (Re: Msg 86750) From: MODEL299 To: DSRTFOX (NR) Looks like we have 2 things in common. I'll be there and I'm USAF also. I will be working with 3 other club members as one of the vendors. It will be a first for us and should prove interesting. Mark -*- End of Thread. -*- 86751 13-APR 22:07 General Information RE: Drives (Re: Msg 86746) From: DSRTFOX To: COCOKIWI I have FIVE drives connected to my DECB (Ext. ADOS 3) system. You figure it out! Nah, I won't do that to ya! I have three PHYSICAL drives. Two are 40 track double sided units configured as 0,1,2,3. The third is a 720K NOT USED under ADOS, just OS-9. I pulled the drive 2 select line from the cable and put a toggle switch in it, effectively switching it "off" when using DECB. I was a little surprised to note that ADOS used the drive 2 and 3 select lines when configured for double sided operation! Without the switch, when I accessed the back of drive 0 (drive 2) under ADOS3, the physical drive 2 would activate also, even though drive 0 and the side select pins are the ones that are actually being used, NOT the physical drive 2! -*- 86760 14-APR 00:51 General Information RE: Drives (Re: Msg 86751) From: COCOKIWI To: DSRTFOX (NR) Interesting Dennis -*- End of Thread. -*- 86756 13-APR 23:28 General Information Monitors From: WA2EGP To: ALL Hi all, After a thread in forum about monitors for the MM/1, I remember someone who was collecting this info but I don't remember them posting anything. IF they didn't, I will. So if you have an MM/1(a) let me know what you are using as a monitor. I'll collect the info and post the list for those who are tired of the CM-8 or Maggies on they MM/1's. -*- 86757 13-APR 23:38 General Information Trenton ComputerFest From: WA2EGP To: ALL If anyone in the NJ area is going to the Trenton ComputerFest on the 16th and 17th, let me know. I am going to try to be there both days. Maybe we all can meet in person. I also know the infamous Bob Billson (UUCPBB for the CoCo) will be there on Sunday. You might be able to bump into him. (I know he'll love me for this ) IF you are a ham, we'll be listening on 146.52. If not, look for a fat guy (that's me) with an HT. This fest is the biggest in NJ and I've been trying to get Bob and some of his friends to get a seminar on OS9 going during the fest. Geez, they even have one on CPM, why not OS9. Anyway, it is at Mercer County College outside of Trenton. They park you in Mercer County Park since there is no room for all the peopl on campus. You get bussed from the park to the campus. I'm not a member of any club or organization running this but it is a good one. Where can you get an OSK machine for $50? (OK, an old one but still.....) Like to see OS9/OSK people there since we don't have any OS9 fests in this area of the country. -*- 86761 14-APR 02:42 OSK Applications RE: Makpal_fix (Re: Msg 85624) From: TIMKIENTZLE To: LARRYOLSON (NR) Part of your problem is that IFF _by_itself_ doesn't describe how to store pictures or sound or anything else. IFF is just a way of keeping a bunch of data in a single file. That data can be pictures or sounds or nearly anything else. In addition to knowing IFF format, to find the pieces and extract them, you must also know how to decipher the pieces. I have a document here which calls itself "EA IFF 85". The EA stands for Electronic Arts, the company which originally developed the IFF format. IFF stands for "Interchange File Format", and the 85 is the year in which this specification was released. The most common format for graphics stored within an IFF file is the ILBM format (?) (InterLeaved Bit Map). Other data formats that can be stored within an IFF file include: 8SVX (8-bit sound), ANBM (animated bitmap), FNTR (raster font), FNTV (vector font), TEXT, FTXT (formatted text), and many others. The best way to find out details of this format is probably to contact Electronic Arts and ask them for copies of the specifications. They'll probably send them to you for a modest fee. Ask around Amiga folks if you need an address for EA. They've published a lot of Ami stuff. If you look in the "help system for OS9" that I uploaded about two or three years ago, one of those archives includes a bunch of documents explaining graphics formats. Probably, this IFF document is in there. If not, bug me until I upload it. - Tim Kientzle -*- 86762 14-APR 02:50 Telecom (6809) RE: Delphi Declining (Re: Msg 85224) From: TIMKIENTZLE To: DSRTFOX (NR) Traffic jams on the information footpath, already!!! "Superhighway"... NOT! -*- 86763 14-APR 03:10 OSK Applications RE: protocol (Re: Msg 85291) From: TIMKIENTZLE To: BKITT (NR) Of the protocols you mentioned, only one has a good published description: Kermit is described quite thoroughly in a book by Frank de Cruz, the inventor of Kermit. It's a good book and highly recommended. For ZModem, I've seen one book that discusses it. That's Mark Nelson's "Serial Communications: A C++ Developer's Guide". It contains a subset of the description given in Chuck Forsberg's electronic document "The ZModem Inter-Application File Transfer Protocol". Nelson's book also contains essentially a copy of the rz/sz source. You mentioned that "ZModem standards are evolving". That's not quite correct. "ZModem" is a fixed protocol, defined by the combination of Chuck Forsberg's document and the rz/sz source code, versions 1.xx. Later versions of rz/sz implement a "ZModem extension" which is PROPRIETARY. Versions of rz/sz later than 1.xx are NOT public domain. No online services that I know of implement anything other than the basic ZModem protocol. ZModem is very different than XModem/YModem. Feel free to ask if you need any pointers in understanding it. - Tim Kientzle P.S. If you find a place that has Forsberg's other documents on YModem, etc, I'd be interested in knowing. I have a couple of his documents, but there are quite a few that I'm missing. Unfortunately, I'm not sure I have any of them in electronic form; I seem to have printed them out and then deleted them. -*- 86764 14-APR 03:36 Programmers Den RE: Ultra C 1.1.2 (Re: Msg 85905) From: TIMKIENTZLE To: PAGAN (NR) I'd be interested to know how GCC compares to those figures. When Ultra-C first came out, I recall some figures that were posted to Usenet showing that Ultra-C code was significantly poorer in both speed and size than GCC code, and was occasionally worse than C 3.2! Hope that situation has improved. I'm also curious to know if Ultra-C is less buggy now. (Those German guys are really tough on compiler testing!) -*- 86768 14-APR 15:05 General Information PC Madness From: ISC To: ALL WOW!! I just read in the letters section of the latest PC magazine that the single letter lowercase "a" takes up 6,655 bytes when it alone is a file in Microsoft Word 6.0 for Windows!! Doesn't that fact virtually scream that it is long past the time that an efficient operation system like OS-9 has potential in the marketplace? (That last should say "operating" system.) (Typos are the bane of my existence.) How many gigabytes will the hard disks have before some enterpreneurs band together to address this market? Anybody interested? Bill -*- FORUM>Reply, Add, Read, "?" or Exit>