2 The OS-9 Forum+ Read Menu Read 1 [NEW] messages 2 Message NUMBER 3 WAITING messages for you (0) Search [new] messages 4 FROM (Sender) 5 SUBJECT 6 TO (Recipient) Enter choice !>1 #: 19410 S1/General Interest 04-Dec-93 01:07:42 Sb: #19379-#SCSI Drives. Fm: Dieter G. Rossmann 70314,1766 To: Mark Griffith 76070,41 (X) Hi Mark, got the InfoXpress going with CIS, still cant logon to Delphi, the Calgary port requiers after Carrier Detect a " O " then " Delphi " after that it will ask for the User Name, then the password... How do I set that up in the Delphi section of the default.ini file? Any help would be appriciated... ---Dieter--- **** Edited with KVed and **** *** Uploaded with InfoXpress Version 1.0.1 *** There are 3 Replies. #: 19411 S1/General Interest 04-Dec-93 10:01:05 Sb: #19410-#SCSI Drives. Fm: Bill Dickhaus 70325,523 To: Dieter G. Rossmann 70314,1766 (X) Dieter, Good to see you've got InfoXpress working here on CompuServe! I'll see if I can help with your Delphi problem. It sounds like you're using a Tymnet node. Make sure that the network type for the network option block for Delphi is set to tymnet. For example: [Tymnet2400] ;Network option block for Tymnet at 2400 bps NetworkType = Tymnet ;Network type is Tymnet Modem = T0 ;Modem option block name BaudRate = 2400 PhoneNumber = 555-1234 I don't know if anyone has actually used a Tymnet node in Canada with InfoXpress, I would think that the nodes are the same, but they might not be. If necessary, I can call your node and check it out. Let me know if you get it working. -Bill- There are 2 Replies. #: 19413 S1/General Interest 04-Dec-93 15:14:57 Sb: #19411-#SCSI Drives. Fm: Zack Sessions 71532,1555 To: Bill Dickhaus 70325,523 (X) fwiw, I have used a local Tymnet node with IX during a few weekends when the Telenet node was down. ------------------------------------ Zack C Sessions ColorSystems "I am Homer of Borg, prepare to be assimi ... OOOOHHH, DOUGHNUTS!" There is 1 Reply. #: 19418 S1/General Interest 04-Dec-93 18:07:06 Sb: #19413-SCSI Drives. Fm: Bill Dickhaus 70325,523 To: Zack Sessions 71532,1555 (X) Zack, I use Tymnet almost all the time. Athough the Sprintnet node is more reliable, there's a 9600 bps Tymnet node in Miami! -Bill- #: 19424 S1/General Interest 05-Dec-93 01:30:39 Sb: #19411-SCSI Drives. Fm: Ken Scales 74646,2237 To: Bill Dickhaus 70325,523 (X) Hi, Bill and Dieter - > I don't know if anyone has actually used a Tymnet node in Canada with > InfoXpress, I would think that the nodes are the same, but they might not > be. I use a Tymnet node from Ottawa to access Delphi, using InfoXpress. Works like a charm. Hey, Dieter, next time I make it to southern Alberta, I will try to get in touch. (I grew up in Vulcan, so Calgary is like part of the old neighbourhood...) Cheers... / Ken -------------------------------------------------------------------------- Ken Scales Delphi:KSCALES Internet:kscales@delphi.com CIS:74646,2237 ** Composed with KVed/Ved and uploaded with InfoXpress ** #: 19412 S1/General Interest 04-Dec-93 12:18:28 Sb: #19410-#SCSI Drives. Fm: Steve Wegert 76703,4255 To: Dieter G. Rossmann 70314,1766 (X) > Hi Mark, got the InfoXpress going with CIS, still cant logon to Delphi, > the Calgary port requiers after Carrier Detect a " O " then " Delphi " > after that it will ask for the User Name, then the password... How do I > set that up in the Delphi section of the default.ini file? Any help > would be appriciated... If the Calgary Tynet port "requires" you to set your terminal identifier to "O", then somethings wrong. Using "O" set your terminal to MARK/SPACE parity. It'll look fine for text messages, but you'll not be able to download any files. You should use the "A" option which saves parity and is what Bill as coded into the login script. What happens if you use things the way they're written? BTW ... I hear tell CompuServe just opened a Calgary node. Have you tried it yet for CompuServe access? *- Steve -* There is 1 Reply. #: 19417 S1/General Interest 04-Dec-93 16:09:10 Sb: #19412-#SCSI Drives. Fm: Bill Dickhaus 70325,523 To: Steve Wegert 76703,4255 (X) Steve, Actually InfoXpress follow Delphi's Tymnet logon instructions to the letter, it sends "O", downloads are not a problem that I'm aware of. I do the same for CIS, now too, although IX used to send "A". -Bill- There is 1 Reply. #: 19421 S1/General Interest 04-Dec-93 22:32:35 Sb: #19417-SCSI Drives. Fm: Steve Wegert 76703,4255 To: Bill Dickhaus 70325,523 (X) > Steve, > > Actually InfoXpress follow Delphi's Tymnet logon instructions to the > letter, it sends "O", downloads are not a problem that I'm aware of. I do > the same for CIS, now too, although IX used to send "A". > > -Bill- > That's interesting. WHen I was futzing around with Tymnet's outdials I was using the O terminal identifier and found I couldn't get any file transfers to work between my computer and the computer I outdialed to. This was using kermit, xmodem, ymodem and zmodem. Switched to "A" and the problems went away. *- Steve -* #: 19425 S1/General Interest 05-Dec-93 04:14:27 Sb: #19410-SCSI Drives. Fm: Mark Griffith 76070,41 To: Dieter G. Rossmann 70314,1766 Dieter, > Hi Mark, got the InfoXpress going with CIS, still cant logon to Delphi, > the Calgary port requiers after Carrier Detect a " O " then " Delphi " > after that it will ask for the User Name, then the password... How do I > set that up in the Delphi section of the default.ini file? Any help > would be appriciated... I'm hoping Bill Dickhaus will see this and answer 'cause I don't know. If he doesn't, send him a message directly. His CIS ID is in your documentation at the end. Mark Griffith Dirt Cheap Computer Stuff Co. "Cheap, But Not Trash" (Uploaded with InfoXpress Ver. 1.01) #: 19420 S3/Languages 04-Dec-93 21:15:47 Sb: #19384-Ultra ???? C Fm: Carl Kreider 71076,76 To: Carl Kreider 71076,76 Well, I answered my own question. Stephan says that 2.4.5 had a bug. It is now fixed in the latest upload to cabrales. #: 19423 S3/Languages 05-Dec-93 01:11:29 Sb: #r63 upload Fm: David Breeding 72330,2051 To: Sysop* (X) I have just uploaded a new version of the patch for rma which enables it to assemble 6309 code. The filename I uploaded it under is "r63v13.ar". However, I made 2 attempts to upload under Cis-B protocol, and apparently it aborted (on CIS's end??). Anyway, I finally attempted it under X1k, and it completed, but I tried to do so under the same name all 3 times, and I'm not sure if CIS deletes an aborted file. The original file length was 48762 bytes. The ar file contains 2 files, rma13.ipc (41799 bytes) and r63.doc (8699 bytes), original lengths. If the file is bad, let me know and I'll try it again. Thanks David There is 1 Reply. #: 19427 S3/Languages 05-Dec-93 11:15:16 Sb: #19423-r63 upload Fm: Steve Wegert 76703,4255 To: David Breeding 72330,2051 David, Your transactions came through just fine and are merging into the library as I type this reply. Thanks for the extra effort in uploading your file ... and sorry for the hassle! Steve #: 19416 S12/OS9/68000 (OSK) 04-Dec-93 16:00:03 Sb: #19407-Gnu-C Fm: Bob van der Poel 76510,2203 To: Carsten B Emde 100034,372 Thanks for the help, Carsten. I'll have to get the new version. Do you know if it is posted anywhere? #: 19426 S12/OS9/68000 (OSK) 05-Dec-93 04:14:34 Sb: #19407-Gnu-C Fm: Mark Griffith 76070,41 To: Carsten B Emde 100034,372 Carsten, > unfortunately, srcdbg in gcc's -? listing means source level debugger (in > general) and not srcdbg from Microware. From 2.5.3 onwards, however, > Stephan Paschedag has implemented the -gg option that pr to the > letter, it sends "O", downloads are not a problem that I'm aware of. I do > the same for CIS, now too, although IX used to send "A". > > -Bill- > That's interesting. WHen I was futzing around with Tymnet's outdials I was using the O terminal identifier and found I couldn't get any file transfers to work between my computer and the computer I outdialed to. This was using kermit, xmodem, ymodem and zmodem. Switched to "A" and the problems went away. *- Steve -* #: 19425 S1/General Interest 05-Dec-93 04:14:27 Sb: #19410-SCSI Drives. Fm: Mark Griffith 76070,41 To: Dieter G. Rossmann 70314,1766 Dieter, > Hi Mark, got the InfoXpress going with CIS, still cant logon to Delphi, > the Calgary port requiers after Carrier Detect a " O " then " Delphi " > after that it will ask for the User Name, then the password... How do I > set that up in the Delphi section of the default.ini file? Any help > would be appriciated... I'm hoping Bill Dickhaus will see this and answer 'cause I don't know. If he doesn't, send him a message directly. His CIS ID is in your documentation at the end. Mark Griffith Dirt Cheap Computer Stuff Co. "Cheap, But Not Trash" (Uploaded with InfoXpress Ver. 1.01) #: 19420 S3/Languages 04-Dec-93 21:15:47 Sb: #19384-Ultra ???? C Fm: Carl Kreider 71076,76 To: Carl Kreider 71076,76 Well, I answered my own question. Stephan says that 2.4.5 had a bug. It is now fixed in the latest upload to cabrales. #: 19423 S3/Languages 05-Dec-93 01:11:29 Sb: #r63 upload Fm: David Breeding 72330,2051 To: Sysop* (X) I have just uploaded a new version of the patch for rma which enables it to assemble 6309 code. The filename I uploaded it under is "r63v13.ar". However, I made 2 attempts to upload under Cis-B protocol, and apparently it aborted (on CIS's end??). Anyway, I finally attempted it under X1k, and it completed, but I tried to do so under the same name all 3 times, and I'm not sure if CIS deletes an aborted file. The original file length was 48762 bytes. The ar file contains 2 files, rma13.ipc (41799 bytes) and r63.doc (8699 bytes), original lengths. If the file is bad, let me know and I'll try it again. Thanks David There is 1 Reply. #: 19427 S3/Languages 05-Dec-93 11:15:16 Sb: #19423-r63 upload Fm: Steve Wegert 76703,4255 To: David Breeding 72330,2051 David, Your transactions came through just fine and are merging into the library as I type this reply. Thanks for the extra effort in uploading your file ... and sorry for the hassle! Steve #: 19416 S12/OS9/68000 (OSK) 04-Dec-93 16:00:03 Sb: #19407-Gnu-C Fm: Bob van der Poel 76510,2203 To: Carsten B Emde 100034,372 Thanks for the help, Carsten. I'll have to get the new version. Do you know if it is posted anywhere? #: 19426 S12/OS9/68000 (OSK) 05-Dec-93 04:14:34 Sb: #19407-Gnu-C Fm: Mark Griffith 76070,41 To: Carsten B Emde 100034,372 Carsten, > unfortunately, srcdbg in gcc's -? listing means source level debugger (in > general) and not srcdbg from Microware. From 2.5.3 onwards, however, > Stephan Paschedag has implemented the -gg option that prduces correct > *.dbg code for Microware's srcdbg. It is available through EFFO. When you say, "It is available through EFFO", what exactly does that mean? From what I have seen, EFFO and Steven are not honoring the GNU copyleft by not distributing source code. /************* /\/\ark ************/ (uploaded with InfoXpress Ver 1.01) #: 19428 S12/OS9/68000 (OSK) 05-Dec-93 14:45:14 Sb: #19394-ReSizeWin() Fm: Mike Haaland 72300,1433 To: Hugo Bueno 71211,3662 Nope, You have to do your own _gs_scsz() afterwords and reset-up the window on the new screen size. You also have to check the minimums yourself, and if the area is too small DWSet with type $FF to the correct minimun size. Hope this helps, - Mike - #: 19415 S12/OS9/68000 (OSK) 04-Dec-93 16:00:01 Sb: #19403-#Internet Fm: Bob van der Poel 76510,2203 To: Steve Wegert 76703,4255 (X) Thanks. I'm going to send Bear Software a message and see if I can get on their IAS service. They charge $0.50 per 10,000 compressed characters they send to my mailbox which for a few messages per day shouldn't amount to all that much. I'll let you know how it works out. There is 1 Reply. #: 19422 S12/OS9/68000 (OSK) 04-Dec-93 22:32:40 Sb: #19415-#Internet Fm: Steve Wegert 76703,4255 To: Bob van der Poel 76510,2203 (X) > Thanks. I'm going to send Bear Software a message and see if I can get on > their IAS service. They charge $0.50 per 10,000 compressed characters > they send to my mailbox which for a few messages per day shouldn't amount > to all that much. I'll let you know how it works out. > Great! I'm curious to hear how they do for you. *- Steve -* There is 1 Reply. #: 19430 S12/OS9/68000 (OSK) 05-Dec-93 17:13:48 Sb: #19422-Internet Fm: Bob van der Poel 76510,2203 To: Steve Wegert 76703,4255 (X) I sent email to Bear Software last night. Today, I had my first compressed file in my mailbox (plus a request for a $25.00 deposit). Seems to be working fine. They promise to collect all the messages, compress them, and send the package to my CIS mailbox on a daily basis. Guess I'll let it run for awhile and see how it goes (and see if there is much that I really want to read). #: 19429 S12/OS9/68000 (OSK) 05-Dec-93 16:22:55 Sb: hpload Fm: BRUCE MOORE 70075,143 To: 76510,2203 (X) Will your hpload program work on printers other than hp? Is it a pcl5 thing or a postscript thing? I am a printer and would like to buy a hi-speed modem and postscript printer (hi-res like 600 dpi) so my customers could call-in and upload printing jobs! I guess they could include the fonts but wouldnt I need to use your utility to download them to the printer. The files my customers would send would have to be postscript (since I can't do much with pagemaker or quark native files on an osk system). #: 19409 S15/Hot Topics 04-Dec-93 01:07:32 Sb: #19380-#MM/1 4MEG hack Fm: Dieter G. Rossmann 70314,1766 To: Steve Wegert 76703,4255 (X) > > For those not so technically inclined, or those not too sure about themselves, > DccS will perform the hack for you for a small fee. If you are interested, > send in your I/O board along with $50 and we'll do the hack for you, test it, > and ship your board back within two weeks (unless we get swamped, then you'll > be notified of the delay). If you would like us to get the SIMMs and install > them for you, please contact me at the number and address below. > The Hack is $50.00, how much for the Simm's? If I get my 68340 upgrade working will be getting the hack, I either do it my self or have it done at Dirt Cheep Computer Stuff Co. So Could You please send me the docs for the hack, so that I can see if I can do it myself or will have it done by Your Company's Staff... Dieter ***Send via InfoXpress*** There are 2 Replies. #: 19414 S15/Hot Topics 04-Dec-93 15:15:06 Sb: #19409-MM/1 4MEG hack Fm: Zack Sessions 71532,1555 To: Dieter G. Rossmann The OS-9 Forum+ Read Menu Read 1 [NEW] messages 2 Message NUMBER 3 WAITING messages for you (0) Search [new] messages 4 FROM (Sender) 5 SUBJECT 6 TO (Recipient) Enter choice !>